As per title, there is on occasions an orange fault light up in the small display.
I flashes up but disappears too quickly to read it.
It happens when I get in the car and turn the ignition on.
Any ideas what this is?
DP
Orange Fault, in Small Dashboard Display
-
- Posts: 232
- Joined: Sat Oct 31, 2020 7:53 pm
When switching the ignition on, many control indicators will light up momentarily whilst carrying out a functional test. This is normal.
If any of the lights stay illuminated or illuminate during running, then the yellow indicates a fault, warning or information.
If any of the lights stay illuminated or illuminate during running, then the yellow indicates a fault, warning or information.
-
- Posts: 232
- Joined: Sat Oct 31, 2020 7:53 pm
May be able to decipher it if you video the screen using your phone during switch on. Freeze the video, during playback, to see the indicator.
-
- Posts: 232
- Joined: Sat Oct 31, 2020 7:53 pm
I'm sure, if it doesn't stay lit then there probably isn't an issue but just part of the boot system.
If you are concerned something is waiting to create an issue, your local dealer will be able to check the error logging, if any, done by your vehicle.
If you are concerned something is waiting to create an issue, your local dealer will be able to check the error logging, if any, done by your vehicle.
-
- Posts: 232
- Joined: Sat Oct 31, 2020 7:53 pm
Depending on your phone, the camera video will take a video number of frames per second which will mean you can run the video at 0.5 speed to see the notification, stopping it in order to fully read it.
If there are any faults, I think you can press the check button on the instrument display or the menu button and scroll through any issues. Not sure if the check button (next to the zero odometer button) only works with the engine off but ignition on...
-
- Posts: 232
- Joined: Sat Oct 31, 2020 7:53 pm
The check button is a good option.
The manual says it switches between the menus of the driver infirmation display.
Also says the button on the end of the indicator stalk will do the same.
The manual says it switches between the menus of the driver infirmation display.
Also says the button on the end of the indicator stalk will do the same.
-
- You may also be interested in...
- Replies
- Views
- Last post
-
- 2 Replies
- 4973 Views
-
Last post by Toosh
-
- 1 Replies
- 1910 Views
-
Last post by Jw427
-
- 1 Replies
- 2128 Views
-
Last post by GRANDLANDX68
-
- 3 Replies
- 2051 Views
-
Last post by GRANDLANDX68
-
- 3 Replies
- 2984 Views
-
Last post by Andy-H