Hello everyone, I have just joined as I have bought a lovely 2020 Grandland X Hybrid 4 Ultimate Nav.
I have had many Vauxhalls, starting with my very first car, a Chevette HSR, a Viva HB, a few Astra's, a couple of Cavaliers (including a lovely SRi 130), then an Insignia and now the Grandland X.
Only had it a few days but I am very impressed with it. It is a Jan 2020 with 18800 miles on it in a red colour (not sure of the proper name).
I have another car I keep as a hobby and a weekend car in the spring & summer, a 2002 Jaguar S Type R 4.2 Supercharged, which is currently being welded......a lot!
So I am getting familiar with the Grandland but there is a button near the shift selector that, well, doesn't work as a button but it has decals on it, so I am wondering if anyone knows what it means?
I have attached an image, I think!
Thanks in advance!
Hello!
Parking heater
The parking heater allows to heat the
vehicle's interior and to ventilate the
vehicle's interior with ambient air.
The operating status of the parking
heater is shown by an indicator with a
LED.
● LED illuminates: A timer has
been set.
● LED flashes: The system is
operating.
The LED is extinguished at the end of
the heating operation or when the
parking heater is stopped using the
remote control.
The parking heater can be
programmed using the Graphic Info
Display / Colour Info Display.
Additionally, the parking heater can
be switched on and off using a remote
control.
Note
The programmed heating /
ventilation is only activated if the
ignition is off and the vehicle is
locked.
If the charging level of the high
voltage battery is below 50%, the
programmed heating / ventilation is
not activated.
If a recurrent heating / ventilation is
programmed and two heating /
ventilation procedures are carried
out without operating the vehicle, the
programmation is deactivated.
The parking heater allows to heat the
vehicle's interior and to ventilate the
vehicle's interior with ambient air.
The operating status of the parking
heater is shown by an indicator with a
LED.
● LED illuminates: A timer has
been set.
● LED flashes: The system is
operating.
The LED is extinguished at the end of
the heating operation or when the
parking heater is stopped using the
remote control.
The parking heater can be
programmed using the Graphic Info
Display / Colour Info Display.
Additionally, the parking heater can
be switched on and off using a remote
control.
Note
The programmed heating /
ventilation is only activated if the
ignition is off and the vehicle is
locked.
If the charging level of the high
voltage battery is below 50%, the
programmed heating / ventilation is
not activated.
If a recurrent heating / ventilation is
programmed and two heating /
ventilation procedures are carried
out without operating the vehicle, the
programmation is deactivated.